When we use the fiber laser cutting machine to cut, if we want to cut the cut products to the most accurate, then we must first understand which aspects will affect the cutting accuracy. Below we will briefly introduce:
- First: The beam emitted by the laser is tapered, so the slits cut out are also tapered. In this case, the stainless steel with a thickness of 0.4MM will be much smaller than the slit of 3MM. Therefore, the shape of the laser beam depends on a major factor affecting the cutting accuracy of the fiber laser cutting machine. Under such conical laser beam conditions, the thicker the workpiece, the lower the accuracy, and therefore the larger the kerf.
- Second: when the conical laser beams are gathered together, they will become smaller and smaller, so the precision of the fiber laser cutting machine will become higher and higher, especially the width of the slit will become smaller and smaller. getting smaller. At this time, the smallest spot can reach 0.01mm. This is also one of the factors that affect the cutting accuracy of the laser cutting machine.
- Third: In this case, the cutting accuracy of different materials is also slightly different. Even if it is the same material, if the composition of the material is different, the cutting accuracy will be different. Therefore, the workpiece material also has a certain influence on the laser cutting accuracy.
- Fourth: the accuracy of the worktable, if the accuracy of the worktable is uneven or other reasons, it will also lead to high-precision laser cutting effect.
