In order to ensure the normal use of the laser cutting machine, daily maintenance and maintenance of the equipment must be carried out. Master the operation essentials of the equipment, you can easily cut the workpiece effect you want and prolong the life of the laser cutting equipment. Here are some daily use and maintenance tips.
First of all, the laser is the core equipment in the laser cutting machine, it provides the cutting light source for the laser cutting machine; in order for your laser cutting machine to work normally and with high quality, ensure the reliable operation of your laser and prolong the service life of the laser, remind you Check and maintain your laser regularly. Fiber lasers can basically be maintenance-free. In addition to ensuring that the surrounding area is clean, the main daily observation is whether the cooling water is normal and whether the voltage is normal. If there is any abnormality,
The second is to pay attention to the maintenance and maintenance of the lens. Do not touch optical surfaces such as focusing lens, protective lens, QBH head, etc. with your hands to prevent scratches or corrosion on the mirror surface. Do not use water, detergent, etc. to clean the optical lens surface. The surface of the lens is coated with a special film, if these are used to clean the lens, it will damage the surface of the lens. Do not place the lens in a dark and humid place, as this will age the lens surface. When installing or replacing the reflector, focusing mirror and protective mirror, do not use too much pressure, otherwise it may cause the deformation of the lens and affect the quality of the beam.
Third, pay attention to the maintenance of laser cutting machine machine tools. Before the machine is put into operation, the machine must be carefully lubricated according to the lubrication instructions. Professional lubrication with the most suitable lubricant is a prerequisite for maintaining the quality of the machine, thus avoiding operational failures and their consequences.
If the machine has not been used for a long time (eg ocean transport), the lubrication of the entire machine must be checked. In addition, when the machine tool is not used for a long time, please apply butter to all moving parts of the machine tool, wrap it with anti-embroidery paper, and regularly check other parts for rust, and rust and prevent rust on the rusted parts (such as If conditions permit, a dust cover can be added, and the machine tool should be cleaned and inspected regularly.
Fourth, the entire equipment must be thoroughly cleaned at regular intervals. Obvious dirt can be scrubbed after shutdown, or removed with an industrial vacuum cleaner. Fuel and drain ports should be kept clean frequently. Scrub oil sump and lubrication points must use lint-free cloth, do not use waste wool.
This article is only a general description and does not cover the entire parts of the laser cutting machine. In order to ensure the normal use of your equipment and prolong its life, please be sure to read the instruction manual and maintenance guide carefully, and operate in accordance with the operating specifications. Please carefully implement the daily maintenance and maintenance steps in the user manual to ensure better and better long-term operation of the laser cutting machine.
