Teach you several skills of laser cutting machine
- 1. The protective lens in the laser head of the laser cutting machine is checked once a day. When the collimating lens or focusing lens needs to be disassembled, record the disassembly process, pay special attention to the installation direction of the lens, and do not install it wrong;
- 2. Before turning on the power of the water cooler, check the water level of the water cooler. It is strictly forbidden to turn on the water cooler when there is no water or the water level is too low, so as to avoid damage to the water cooling equipment. It is strictly forbidden to squeeze and step on the inlet and outlet pipes of the water cooler to keep the water passages unblocked;
- 3. The operator of the laser cutting machine or the person who is close to the laser during the use of the laser should wear appropriate laser protective goggles and protective clothing. In the area where the protective goggles are worn, there must be good indoor lighting to ensure The operator operates smoothly;
- 4. When using gas cylinders, avoid crushing wires, water pipes and air pipes to avoid leakage of electricity, water and air. The use and transportation of gas cylinders shall comply with the gas cylinder monitoring regulations. Do not expose gas cylinders to direct sunlight or near heat sources. When opening the bottle valve, the operator must stand on the side of the bottle mouth;
- 5. Routine maintenance must be performed, regular statistics on the use of the machine, and regular records of each part of the fiber laser cutting machine. If the effect is not good, replace it in time to prevent problems before they occur; such as when parked for a long time, the Please smear butter on all moving parts of the machine tool and wrap it with anti-embroidery paper. For other parts, regularly check whether there is rust, and derust and prevent rust on the rusted parts (if possible, you can add a dust cover. ), and the machine should be cleaned and inspected regularly.
